Skip Ribbon Commands
Skip to main content

Technical Standards

The Technical Standards are intended to provide uniform and consistent quality standards for design and construction of all District facilities. They outline the minimum acceptable standards for products, materials and systems used in all facility improvements, including new construction, renovation, remodeling and maintenance. 

The numbering for the Technical Stand​ards loosely follow current CSI Master format, 2010 edition.  Under no circumstances are the Technical Standards to be used as unedited project specifications.

Beaverton School District seeks to procure products and materials through open, competitive bidding to the greatest degree possible. However, the District prefers known or proven products and materials to unknown or experimental ones. In December 2014, in accordance with ORS 279C.345 the school board approved a list of brand name products that will be used throughout the District via School Board Resolution 14-494. Substitutions are not acceptable. When a product specification is followed by “or equal,” it is being used as the Basis of Design, an alternate product requires BSD approval.
      

LATE-BREAKING CHANGES HERE​​​​​​​​​​​​​​​
This Technical Standards Registry includes approved changes to the published Technical Standards/Divisions 6-32. These changes will remain in the registry until incorporated into the published division(s), at which time, they will drop from the register.

​      

            UPDATED List of Brand Name Products ​(September 2018)

UPDATED Division 6: Carpentry & Casework (May 2018, see revisions log on last page for most recent changes)​

Division 7: Roofing & Thermal Envelope Systems (March 2015, see revisions log on last page for most recent changes)

UPDATED Division 8: Doors, Windows, & Openings​​​​​​ ​(May 2018, see revisions log on last page for most recent changes)

Division 8: Hardware Schedule Guide ​(June​ 2015)​​​​​

Division 9:  Paint & Finishes (December 2017, see revisions log on last page for most recent changes)

UPDATED Division 10:  Specialties​​​ (May 2018)​​​​

Division 11:  Equipment​​ ​​(December 2017, see revisions log on last page for most recent changes)

NEW Division 13:  Special Construction (May 2018)

Division 14:  Conveying Systems​​​​ (March 2015)

UPDATED Division 22:  Plumbing​ (May 2018, see revisions log on last page for most recent changes) ​

Division 23:  HVAC​ ​(September 2014)

UPDATED Division 26:  Electrical​​ ​(June 2018, see revisions log on last page for most recent changes)

UPDATED Division 27:  Communications & Technology​​​​​ (June 2018, see revisions log on last page for most recent changes)

Division 28:  Electronic Safety & Security​​​​ ​(April 2018, see revisions log on last page for most recent changes)

Division 32:  Grounds & Exterior Improvements​ ​ ​(December 2017, see revisions log on last page for most recent changes)​

BSD Cut Sheets​

Appendix A:  Category Cabling (5e,6,.6a) (this appendix supersedes callouts for cabling coloring in any other Divisions - April 2016) ​​




​​​​​​